Axis Q8685-LE Guide D'utilisation page 25

1
I/O cable (optional, not included)
2
Network cable (not included)
5. Insert the I/O cable (optional) through the strain relief with a distance of 420 mm (16.5
in) from the strain relief to the end of the cable.
6. Insert the network cable (optical fiber cable and/or RJ45 cable) through the strain relief
with a distance of 580 mm (23 in) from the strain relief to the end of the connector.
For more information on different network connectivity options, see Install the network
link on page 29.
7. Close and tighten the three strain reliefs.
AXIS Q8685-LE PTZ Network Camera
25
EN