Malfunction And Remedies - IARP GLOBO RETRÒ Série Instructions D'emploi Et D'entretien

13. MALFUNCTION AND REMEDIES

Most of the functioning inconveniences are generally due to simple causes or to defective electrical connections.
These problems can usually be solved on site.
Check that the unit is properly plugged
Check that the unit is properly plugged
Check that the plug cord is broken
If power failure is not due to any of the above causes, call the nearest after-sales service immediately,
empty the cabinet and store the foods in coldrooms or refrigerators that may ensure their preservation
temperature.
Check the drop-leaf glass is perfectly closed
Make sure that the cabinet has been filled correctly
Check that the unit is not adjacent to sources of heat
Check the temperature setting
If failure to cool should is not due to any of the above reasons it it persists on even after the above checks, resort to
the nearest after-sales service.
Check that all the bolts and nuts are properly fastened
Check that the unit is placed on an even surface
Check if any pipe or fan is in contact with any other part of
the body
Should the inconvenience persist, contact the nearest after-sales service.
THE UNIT DOES NOT START
CAUSE
THE INTERNAL TEMPERATURE IS NOT COLD ENOUGH
CAUSE
THE UNIT IS NOISY
CAUSE
SOLUTION
Insert the plug
Insert the plug correctly
Replace the plug cable
SOLUTION
Close correctly
Load the product correctly
Position the equipment correctly
Set the correct temperature
SOLUTION
Screw in the screws
Position the equipment correctly
Switch off the counter and distance
the parts in contact in the event
the problem persists, contact the
support service.
AUTHORISED STAFF
User
User
Technical support
AUTHORISED STAFF
User
User
User
User
AUTHORISED STAFF
User
User
Technical support
-31-