Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
7. INSTALLATION
7.1 STORAGE AND DISMANTLING
During unloading and movement operations, avoid tilting the machine and avoid sudden manoeuvres.
WARNING!
Use protective gloves during unpacking and installation operations.
The unit is shipped anchored onto a wooden base and protected by corner posts,
cardboard top and nylon wrapping. Keep all packaging away from children. For
each subsequent handling of the cabinet, the use of the wooden platform is
recommended. Carefully remove the packaging, taking care not to damage the
components and not to throw away those that will be needed for assembly.
The unit is shipped anchored
onto a wooden base and
protected by corner posts,
cardboard top and nylon
wrapping. It must only be
handled using a fork lift truck with adequate
power to the load.
Positioning the appliance horizontally or
on its side or upside down is to be strictly
avoided.
The equipment MUST be kept vertical.
7.2 SELECTING THE PLACE OF INSTALLATION
In selecting the place of installation, ensure that the following instructions are observed, this being vital for proper
and troublefree working of the cabinet:
• Do not install the cabinet outdoors.
• Do not install the cabinet in the vicinity of heating radiators or other heat sources.
• Do not install the cabint where it is exposed to direct sun light (e.g. through windows).
• Do not install the cabinet where it is exposed to drafts from ventilators
open doors.
• Pay attention to air outlet from air conditioners/ ventilators.
• Keep the air intake and outlet area around the plinth area of the cabinet
clear of cartons and other obstacles.
• It is necessary taht the condensing unit obtains a good circulation of
air around it; also the area around the condensing unit should not be
obstructed by boxes or other objects; keep a distance from the wall of
10 cm. at least.
CARDBOARD COVER
POLYSTYRENE CORNERS
WOODEN BASE
Air-Condition
-23-
Publicité
Chapitres
Table des Matières
