Set Alarm Limits - Weinmann SOMNOalarm Mode D'emploi

4 Preparation and operation

4.3 Set alarm limits

Result
28 EN SOMNOalarm
1. Press the alarm key
and the alarm indicator shows green.
You are in programming mode as long as the alarm indicator
is on.
2. Select the alarm limit within about 5 seconds in accordance
with the table below.
Alarm limit Action
Low Press alarm key 1x 1 long beep
High Press alarm key 2x 2 short beeps > 50 l/min
The alarm limit is set and the alarm indicator goes out.
until the sequence of beeps sounds
Acoustic
signal
Leakage value
15 l/min - 20 l/min