Faults; Servicing - Weinmann SOMNOalarm Mode D'emploi

7

Faults

8

Servicing

If you are unable to eliminate faults immediately with the help of
the table, contact your specialist dealer. To prevent even greater
damage, do not continue operating the device.
Fault
Device is connected but
does not emit an alarm.
Alarm indicator does not
come on, though beep is
sounding.
Alarm key does not
react.
The device requires no servicing.
Cause
Incorrect channel
assignment on therapy
device
Alarm limits incorrectly
set
Device defective
Alarm indicator
defective
Device defective
SOMNOalarm
7 Faults
Remedy
Have analog channel
checked by specialist
dealer or physician
Set alarm limits (see
"4.3 Set alarm limits",
page 28)
Replace device
Replace device
Replace device
EN 31