Preparation And Operation; Connect Device; Acknowledge Alarm - Weinmann SOMNOalarm Mode D'emploi

4

Preparation and operation

4.1 Connect device

Requirement
Result

4.2 Acknowledge alarm

Requirement
Result
The therapy device is on standby.
1. Put the plug in the serial port of the therapy device.
An automatic self-test runs, simultaneously covering the
following points:
• a sequence of beeps sounds
• the alarm indicator briefly flashes green
After the self-test, the device starts at the alarm limit set and is
on standby.
A leakage alarm has occurred.
• A sequence of beeps sounds
• The alarm indicator flashes yellow
1. Press the alarm key
• The sequence of beeps stops
• The alarm indicator flashes green 2x.
2. Eliminate leak within 30 seconds.
The leakage alarm is acknowledged.
4 Preparation and operation
1x.
SOMNOalarm EN 27