Geemarc CL 10 Mode D'emploi page 5

b) 'Two touch' locations - Lift handset,
await dial tone. press the MEM button
followed by the keypad button under which
the desired number is stored. The stored
number will be dialled out automatically.
c) To dial a number partly stored in a 'One
touch' location (such as an access code)
with the remaining part in another location,
lift handset and press the 'One touch'
location button under which the 3 or 4 digit
access code is stored and then either
press:
(i)The 'One touch' location button where the
remainder of the number is stored, or
(ii) The MEM button followed by the location
button 0-9 under which the remainder of
the number is stored.
Note : If you wish to change a number in a
memory location, simply follow the
instructions for storing a number. Entering
the new number will automatically erase the
previous number.
9 - WALL MOUNTING
Use this template to mark the screw hole
centres. Slide out, turn around and slide
back in the wall mounting handset clip
(which can be found in the base unit, just
below where the ear peice locates), this
ensures that the handset stays firmly in
position.
GUARANTEE
From the moment your Geemarc product
is purchased, Geemarc Telecom Ltd
guarantee if for the period of one year.
During this time, all repairs or replace-
ments (at our option) are free of charge.
Should you experience a problem then
contact our helpline or the retailer from
whom you purchased your Geemarc
product.
The guarantee does not cover accidents,
negligence or breakages to any parts.
The product must not be tampered with or
taken apart by anyone who is not an
authorised Geemarc representative.
The guarantee of Geemarc Telecom Ltd
in no way limits your legal rights.
IMPORTANT: YOUR RECEIPT IS PART
OF YOUR GUARANTEE AND MUST BE
RETAINED AND PRODUCED IN THE
EVENT OF A WARRANTY CLAIM
Please note: The guarantee applies to
the United Kingdom only.
For product support and help
visit our website
at www.geemarc.com
telephone 01707 384438
or fax 01707 372529
5