Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION
Caution:
Unpack the appliance and check whether the
•
appliance has suffered any damages. Do not connect
the appliance to the power net if it is damaged.
It is recommended to wait 4 hours before connecting
•
the appliance to a socket, so that the oil can flow
back to the compressor.
There should be adequate air circulation around the
•
appliance, so that it does not overheat.
Do not place the appliance too close to a radiator or
•
stove.
Make sure that after installation, you still have access
•
to the power plug.
1. Make sure that there is
enough room to swing open
te door. Leave a space of at
least 5 cm at both sides of
the appliance. Leave a space
of at least 10 cm between the top of
the appliance and any overhanging
wall units. Caution: it is better not to
have any overhanging wall units above
the appliance.
2. Make sure that the appliance stands up
straight. Use the levelling feet at the bottom of the
appliance to adjust.
BEFORE THE FIRST USE
Clean the inside of the appliance and all the
accessories with lukewarm water and some neutral
soap. Dry thoroughly before using the appliance for the
first time.
51
Publicité
