Publicité
Les langues disponibles
Les langues disponibles
REVERSING THE DOOR
Caution:
Make sure that the appliance is empty and
•
disconnected from the power net.
To reverse the door, you need to tip the appliance
•
backwards. Make sure that the appliance can lean on
something firm and stable, so that it does not slip away
while reversing the door.
All removed objects are still needed to reinstall the
•
reversed door.
Do not lay the appliance flat, this could damage the
•
cooling system.
It is recommended to execute the assembly with 2
•
people.
1. Remove two screws at rear side of top cover.
2. Remove top cover and place it aside.
3. Unscrew top hinge and then remove door and place it
on a soft pad to avoid scratch.
4. Unscrew bottom hinge of freezer door. Then remove the
door and place it on a soft pad to avoid scratch.
5. Move door lock from left side to right side. Move the two
middle hole covers from the one side to the other.
6. Move hinge hole cover from right side to left side.
7. Rotate freezer door and place hinge side at left side.
And then fix the door by holder.
8. Unscrew bottom hinge. Then remove the adjustable feet
from both side.
9. Unscrew and remove the bottom hinge pin, turn the
bracket over and replace it.
10. Fit the bracket fitting on the left side and install the
bottom hinge pin. Replace both adjustable feet.
11. Place the door back on. Ensure the door is aligned
horizontally and vertically, so that the seals are closed on
all sides before finally tightening the top hinge.
12. Put the top cover and fix it with 2 screws on the back.
49
Publicité
