Connect Other Cables - Pioneer VSX-S520D Mode D'emploi

> Before Start > Part Names

6. Connect Other Cables

1
a
VSX-S520D
2
c
a DAB/FM antenna, b FM indoor antenna, c Ethernet cable, d Power cord
18
> Install > Initial Setup
(North American
b
VSX-S520
3
d
d
(North American
models)
> Playback
Supplementary information | Advanced Setup | Others
Antenna Hookup
DAB/FM antenna (VSX-S520D) : Connect the supplied
models)
DAB/FM antenna to the ANTENNA DAB/FM terminal. Make
sure the plug is pushed in all the way, then fix in place by
turning the nut to the right. Use a tack or similar to fix the
antenna to a wall.
FM indoor antenna (VSX-S520) : Connect the supplied FM
indoor antenna to the ANTENNA FM UNBAL 75h terminal.
Move the FM indoor antenna around while playing the radio
to find the position with the best reception.
Network Hookup
Connect this unit to the network using wired LAN or Wi-Fi
(wireless LAN). You can enjoy network features such as
internet radio by connecting the unit to the network. If you
connect by wired LAN, connect with an Ethernet cable to the
NETWORK port as shown in the illustration. To connect by
Wi-Fi, then after selecting "Wireless" in "3. Network
Connection" (P20) in Initial Setup, select the desired
setting method and follow the onscreen instructions to
configure the connection.
Power Cord Hookup
Connect the power cord of this unit only after all other
connections are completed.
E
N