HIKOKI VB 3616DA Mode D'emploi page 12

English
○ If the BSL36B18 is installed in the power tool, the power
output will exceed 100 Wh and the unit will be classifi ed
as Dangerous Goods for freight classifi cation.
Power Output
Wh
2 to 3 digit number
USB DEVICE CONNECTION
PRECAUTIONS (UC18YSL3)
When an unexpected problem occurs, the data in a USB
device connected to this product may be corrupted or lost.
Always make sure to back up any data contained in the USB
device prior to use with this product.
Please be aware that our company accepts absolutely no
responsibility for any data stored in a USB device that is
corrupted or lost, nor for any damage that may occur to a
connected device.
WARNING
○ Prior to use, check the connecting USB cable for any
defect or damage.
Using a defective or damaged USB cable can cause
smoke emission or ignition.
○ When the product is not being used, cover the USB port
with the rubber cover.
Buildup of dust etc. in the USB port can cause smoke
emission or ignition.
NOTE
○ There may be an occasional pause during USB
recharging.
○ When a USB device is not being charged, remove the
USB device from the charger.
Failure to do so may not only reduce the battery life
of a USB device, but may also result in unexpected
accidents.
○ It may not be possible to charge some USB devices,
depending on the type of device.
NAMES OF PARTS (Fig. 1 – Fig. 35)
Reaction stopper A
Bending roller
Center plate
Center roller
Turn table
Cam cover
Guide
Lever
Inner cover
Warning label (Bending)
Warning label (Cutting)
Gear cover
Reaction stopper B
Cover
Grip rubber
Motor
Switch trigger
Handle
Switch lock
Battery
Battery cover
Setting dial
Alignment position
Name plate
Warning label (Battery cover)
Hexagonal bar wrench (For M5 hexagon socket bolt)
Switch panel
Manual mode switch
Mode indicator lamp
Cutter guard
Upper cutter
Lower cutter
Hexagon socket bolt
Rebar
Flat head screwdriver
Bending length
Stopper
Bolt
Nut
Hole to fi x unit
Work bench
Latch
Charge indicator lamp
Battery level indicator switch
Battery level indicator lamp
Rubber cover
USB port
USB cable
SYMBOLS
WARNING
The following show symbols used for the machine.
Be sure that you understand their meaning before
use.
VB3616DA:
Cordless Portable Rebar Cutter/Bender
To reduce the risk of injury, user must read
instruction manual.
12