Getting Started; Turning On The System; Carrying The System - Sony GTK-XB60 Mode D'emploi

Masquer les pouces Voir aussi pour GTK-XB60:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Getting Started

Turning on the system

1
Connect the AC power cord
(supplied) to the AC IN jack on
the rear of the unit, and then
to the wall outlet.
GTK-XB60
GTK-XB90
 AC power cord (supplied)
 To wall outlet
The system is turned on in the
demonstration mode and the
demonstration starts automatically.
2
Press  to turn on the system.
The  indicator lights up in green.
Hint
The system can be used with the built-in
battery instead of connecting the AC power
cord (supplied) to a wall outlet if you have
charged the battery before use. For details,
see "Charging the battery" (page 9).
8
GB
Deactivating the demonstration
Hold down W.PARTY CHAIN
LIGHT for more than 3 seconds
while the demonstration is
performed.
The demonstration ends and the
system enters the standby mode.
When you hold down W.PARTY CHAIN
LIGHT during the standby mode, or
when you disconnect and reconnect
the AC power cord, the system enters
the demonstration mode.

Carrying the system

Before carrying the system, disconnect
all the cords.
Note
Correct hand placement while carrying the
system is very important to avoid personal
injury and/or property damage.

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Gtk-xb90

Table des Matières