Sony GTK-XB60 Mode D'emploi page 27

5
Press ADD on system . The
ADD L/R indicators on the
unit will flash.
Then the L/R indicators on both
systems change their status
from flashing to lit while the
(BLUETOOTH) indicator on
system  is turned off.
Hint
When the connection by the speaker
add function is established very quickly,
the L/R indicators on system  may
light up directly without flashing.
6
Hold down ADD on system
 repeatedly to select the
output mode.
The ADD L/R indicators on both
systems show the current output
mode.
Each time you hold down ADD, the
output mode changes as follows.
 : Double mode
(stereo/stereo)
 : Stereo mode (L ch/R ch)
 : Stereo mode (R ch/L ch)
Hint
To change the output mode, operate
system  (master system), on which
you have activated the speaker add
mode.
27
GB