Télécharger Imprimer la page

Candy CPDC 451 Mode D'emploi page 37

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 13
If the red indicator light "B" comes on, it means that the temperature in the freezer com-
partment is not low enough. This may be due to:
- the appliance having only just been switched on
- the door having been left open, or not having been properly closed
- food having been put in for freezing.
The red indicator light goes out when the selected temperature has been reached.
The single compressor version has only one regulator (see fig. 2).
The thermostat "D" controls the refrigerator and the freezer.
In the "0" position neither the refrigerator nor the freezer are working.
Turn the knob clockwise, the appliance switches on and the green indicator light "A"
comes on.
When the thermostat knob is turned to "S" (rapid freezing) the yellow indicator light "C"
comes on and the compressor works continuously for 6 hours. At the end of the 6 hours
the yellow light will flash, this indicates that the thermostat knob must be turned back to a
normal position.
If the red indicator light "B" comes on, it means that the temperature in the freezer com-
partment is not low enough. This may be due to:
- the appliance having only just been switched on
- the door having been left open, or not having been properly closed
- food having been put in for freezing.
The red indicator light goes out when the selected temperature has been reached.
CONTROL PANEL (fig. 4B & fig. 13) FOR FRIDGE FREEZER WITH 2 COMPRESSORS
Thermostat "A" controls the freezer, turn the dial clock-wise and the freezer will turn on
and the green led "B" and red LED "C" will switch on. The red light "C" will turn off as soon
as the freezer reaches its set temperature.
The yellow LED "E" will light up (as show in fig. 4b), when the quick freeze switch "F" is
turned on, while the model with the control panel shown in fig. 13, super freeze will be
activated when dial "A" is turned to the "Super" position.
Thermostat dial "H" controls the temperature of the fridge, if it is set on "0" the fridge will
not work. Turning the dial "H" clock-wise will turn the fridge on and the green led "G" will
light up.
CONTROL PANEL (fig. 4) FOR FROST FREE FRIDGE FREEZER WITH 1 COMPRESSOR
Thermostat dial "A" controls the temperature in the freezer, when the dial is in the "0" posi-
tion the fridge and freezer are both off. Dial "H" adjusts the fridge temperature. Turning
dial "A" clock-wise turns the freezer on, the green LED "B" switches on and the red LED
"C" flashes. This initial operation should only be done when the device is turned on.
The 4 green LEDs "D" indicate the temperature inside the freezer. The yellow LED "E"
switches on when the super freeze switch "F" is pushed for at least 4 seconds, then the
compressor will work continuously.
Dial "H" adjusts the fridge temperature. At the "0" position the fridge will not work. Turning the
dial "H" clock-wise, turns the fridge on and the green LED "G" lights up (only if the "A" dial is
in a different position from "0"). The fridge works only if the green LED "B" is switched on.
Failure signal: when the red LED "C" flashes and one of green LEDs "D" is switched on, it
means that there is a power failure or some food in the freezer has been at a temperature
above 0 degrees for a certain time. To turn the flashing red LED ("C") off push "F" for at
least 4 seconds.
For optimum results within the freezer we suggest that you set the dial so that the green
led "X" lights up, doing this will guarantee optimum food preservation.
CONTROL PANEL (fig. 13) FOR FROST FREE FRIDGE FREEZER WITH 1 COMPRESSOR
Thermostat dial "A" controls the temperature in the freezer, when the dial is in the "0"
position the fridge and freezer are both off. Dial "H" adjusts the fridge temperature.
37

Publicité

loading

Ce manuel est également adapté pour:

Cpdc 451 vzCfbc 3160 aCpc 340Cpdc 381 vzsCpc 280Cpdc 381