Honda Power Products TILLER F560 Manuel De L'utilisateur page 43

2. Changing transmission oil
1. Place the tiller on a level surface.
2. Remove the oil filler cap and drain bolt to drain.
3. Reinstall the drain bolt. Fill the transmission with same oil as the
engine oil (see page
Oil capacity: 2.20 L (2.32 US qt, 1.94 lmp qt)
DRAIN BOLT
Wash your hands with soap and water after handling used oil.
Please dispose of used motor oil in a manner that is compatible with
the environment. We suggest you take it in a sealed container to your
local service station for reclamation. Do not throw it in the trash or
pour it on the ground.
40
14 ) up to the level. Reinstall the oil filler cap.
OIL FILLER CAP