Starting The Engine - Honda Power Products TILLER F560 Manuel De L'utilisateur

5.

STARTING THE ENGINE

Be sure the clutch is disengaged and the shift lever is in the neutral
position to prevent sudden uncontrolled movement when the engine
starts.
The clutch is engaged by pulling in the clutch lever and disengaged by
releasing the lever.
1. Turn the fuel valve to the ON position.
Check for tighteness of drain knob.
2. In cold weather and when the engine is cold, move the choke lever
to the CLOSE position.
Do not use the choke if the engine is warm or the air temperature is
high.
CLOSE
3. Turn the engine switch to the ON position.
20
DRAIN KNOB
ON
ON
CHOKE LEVER
C C L L O O S S E E
ON
FUEL VALVE
ON
ENGINE SWITCH