Honda Power Products TILLER F560 Manuel De L'utilisateur page 42

1. Changing engine oil
Change the oil when the engine is warm to assure rapid and complete
draining.
1. Remove the oil filler cap and the drain bolt.
2. Tilt the tiller back to drain the crankcase completely.
3. Reinstall and tighten the drain bolt and refill with the recommended
oil (see page
4. Reinstall and tighten the filler cap.
Oil capacity: 0.58 L (0.61 US qt, 0.51 lmp qt)
DRAIN BOLT
Wash your hands with soap and water after handling used oil.
Please dispose of used motor oil in a manner that is compatible with
the environment. We suggest you take it in a sealed container to your
local service station for reclamation. Do not throw it in the trash or
pour it on the ground.
14 ).
OIL FILLER CAP
UPPER LIMIT
39