Installing The Bluetooth Adapter (Optional) - Villeroy & Boch ProDetect 2 Manuel D'installation

Installation
Attaching the HF sensor
1. Attach the Terostat tape (supplied) to the HF sensor.
The arrow on the HF sensor must point towards the ceramic.
The sensor cable is guided upwards.
2. Depending on which urinal is used, attach the HF sensor to the spot marked on the ceramic, and push firmly.

17.5 Installing the Bluetooth adapter (optional)

ProDetect 2 is pre-fitted for the connection of a Bluetooth adapter.
The Bluetooth adapter is permanently installed in the urinal.
S. 49
Advice!
Mains model
The Bluetooth adapter can be used only with mains operation.