EUROM Fly Away 30-2 IPX4 Manuel D'utilisation page 8

Operating principle
The insect-killer is designed to attract flying insects, such as flies, moths, mosquitoes, etc. using
ultraviolet light. As they fly towards with light, they fly into an electrified metal screen that
electrocutes them.
The device
The Fly Away 30-2/40-2 IPX4 insect-killer is highly efficient and safe. The electrified screen is
made from stainless steel. This material has been chosen so that there is only minimal crackling
on electrocution and the insects neither combust nor is the material damaged.
The special UV lamps are totally harmless to humans and pets.
An external safety screen protects users from coming into unintentional contact with the
electrified screen.
The insect-killer uses no chemicals or sprays, does not emit smoke or odours, produces no
waste and is environmentally friendly.
The Fly Away 30-2/40-2 IPX4 insect-killer is designed to be used indoors, in the home, in work
areas, retail outlets, etc. The fact that the device is splash-proof (IPX4) means that it is also
suitable for damp rooms, e.g. stables.
Description
Installation
When placing and installing the insect-killer, it is important to take the location of the device in
the room/space into account.
Hang the insect-killer centrally in the area; that way, the ultraviolet light can be dispersed
1.
better and attract insects from the entire area.
Hang the insect-killer or a wall or in a corner if the room/area is not very large.
2.
The best height for the insect-killer is 1.5 to 2 metres off the ground, which is the most
3.
common flying height for insects.
8
GB
Top cover
1.
Suspension eye
2.
Light fitting
3.
UV tube
4.
High Voltage grill
5.
Safety grill
6.
Collection tray
7.