Product Specifications; General Specifications; Display - Wacom DTF-720 Guide D'installation Et Manuel D'utilisation

PRODUCT SPECIFICATIONS
GENERAL SPECIFICATIONS
Physical dimensions (W x D x H)
Weight
Input voltage
Power consumption
USB hub
Operating temperature and humidity
Storage temperature and humidity
Certification and compliance

DISPLAY

Display
Screen size
Signal inputs
Signal outputs
Resolution
Refresh rate
Pixel pitch
Color depth
Brightness
Contrast ratio
Plug and Play
LCD quality
Appendix
Page 50
400 x 362 x 55.5 mm (15.8 x 14.3 x 2.2 in), excluding stand
6.0 kg (13.2 lb), including stand
12 VDC
37 W (max.)
2 W or less in sleep mode
1 W or less in off mode
Integrated USB hub: USB v2.0
Powered hub with two external ports, 500 mA per port
5° to 35° C, 20 to 80% RH (non-condensing)
-10° to 60° C, 20 to 90% RH (non-condensing)
FCC part 15 class B & Subpart C, Industry Canada Class B, CE,
VCCI class B, EDID 1.3, C-tick, BSMI, MIC, CB, CCC, The European
Union RoHS Directive 2002/95/EC, Chinese RoHS, Korean RoHS
a-Si TFT active matrix LCD
17.0 in (337.9 x 270.3 mm (13.31 x 10.65 in))
VGA (Analog RGB)
VGA (Analog RGB)
1280 x 1024 pixels (SXGA), 1024 x 768 pixels (XGA),
800 x 600 pixels (SGA), 640 x 480 pixels (VGA)
50 to 75 Hz (vertical)
All scan modes are non-interlaced.
0.264 x 0.264 mm (0.010 x 0.010 in)
16.7 million
2
300 cd/m
650:1
DDC 2B
Each DTF-720 LCD panel is produced under very stringent quality
standards. Production techniques cannot guarantee an absolutely
perfect TFT display. Wacom does not allow any pixel to be always
white or always black. A small number of pixels (5 or less) are
allowed to show a wrong color for some parts of the color spectrum.
This does not mean the display is defective.