Control Panel Overview; Customizing The Pen - Wacom DTF-720 Guide D'installation Et Manuel D'utilisation

CONTROL PANEL OVERVIEW

Use the Pen Tablet control panel to customize your product. Experiment with different settings to find
what works best for you. Any changes you make will take effect immediately, but you can always click
D to return to the factory settings.
EFAULT
Tool tips are available for most control panel items. Position the screen cursor over an item and let it
rest there; in a few moments the Tool Tip will pop up.
Additionally, your keyboard tab and arrow keys can be used to navigate the control panel.

CUSTOMIZING THE PEN

Customizes the
amount of pressure
needed to click or
draw with the pen.
Adjusts the size of
the double-click
area. See page 24.
Hint: To create broad brush strokes or to click with a light touch, use a soft tip setting.
A soft setting provides a wider range of pressure values with most pressure-sensitive
applications. In some applications, a soft pressure setting can make the pen overreact
– any small press on the pen is magnified on the screen. If you experience this, try a
firmer tip setting. A firm tip setting will give you maximum control while drawing thin
lines.
Note: When customizing your pen, choose those options that match the buttons on the pen with which you are
working.
Customizing
Page 20
Selects the pen side switch button
functions. See page 24.
Displays information about the
control panel and driver.
Closes the control panel.
When checked, an
audible "click" sound will
be heard whenever a
pen click occurs and
your computer speakers
are turned on.
Returns the P tab settings to their
EN
factory defaults.