Product Specifications; General Specifications; Display - Wacom DTF-521 Guide D'installation Et Manuel D'utilisation

PRODUCT SPECIFICATIONS
GENERAL SPECIFICATIONS
Physical dimensions (W x D x H)
Weight
Input voltage
Power consumption
Operating temperature and humidity
Storage temperature and humidity
Certification and compliance

DISPLAY

Display
Screen size
Signal inputs
Signal outputs
Resolution
Refresh rate
Pixel pitch
Color depth
Brightness
Contrast ratio
Plug and Play
LCD quality
344.0 x 300.0 x 49.0 mm (13.6 x 11.8 x 1.9 in), excluding stand
4.6 kg (10.1 lb), including stand
12 VDC
23W or less
5° to 35° C, 20 to 80% RH (non-condensing)
-10° to 60° C, 20 to 90% RH (non-condensing)
(maximum storage humidity is 38% at a temperature of 60° C, and
maximum storage temperature is 42° C at a humidity of 90%)
FCC part 15 class B, Industry Canada Class B, CE, EDID 1.3, C-tick,
BSMI, MIC, CCC, The European Union RoHS Directive 2002/95/EC
a-Si TFT active matrix LCD
15.0 in, diagonal
VGA (Analog RGB)
VGA (Analog RGB)
1024 x 768 pixels (XGA), 800 x 600 pixels (SVGA),
640 x 480 pixels (VGA)
45 to 70 Hz (vertical) in XGA mode,
45 to 75 Hz (vertical) in other modes
All scan modes are non-interlaced.
0.297 x 0.297 mm (0.012 x 0.012 in)
16.2 million (6 bits for RGB + FRC)
2
250 cd/m (typical)
500:1
DDC2B
Each DTF-521 LCD panel is produced under very stringent quality
standards. Production techniques cannot guarantee an absolutely
perfect TFT display. Wacom does not allow any pixel to be always
white or always black. A small number of pixels (4 or less) are
allowed to show a wrong color for some parts of the color spectrum.
This does not mean the display is defective.
Appendix
Page 49