Qlima Ronda 80 Manuel D'utilisation page 157

ECONO SEND
SEND: Use this button to confirm the selected mode and send it to the stove.
TURBO
ECONO SEND
AUTO
ON 1 ECONO: Use this button to activate/deactivate the ECONO mode. Hold the OFF 1
TURBO
button down for at least 2 seconds to activate/deactivate this mode.
ON 2 CANCEL OFF 2
ECONO SEND
AUTO
ON 1
TURBO
TURBO: Use this button to activate/deactivate the TURBO mode. Hold the
ON 2 CANCEL
AUTO
ON 1
button down for at least 2 seconds to activate/deactivate this mode.
ECONO SEND
ON 2 CANCEL
TURBO
CLOCK: To set the clock mode on the remote control, proceed as follows:
ECONO
AUTO
ON 1
OFF 1
1. Press
TURBO
ON 1
2. The
ON 2 CANCEL OFF 2
ON 2
3. Use the
ECONO SEND
4. Press the
TURBO
AUTO
ON 1
ON1: Use this button to set a schedule for switching the stove on automati-
ECONO SEND
ON 2 CANCEL
cally (programme 1).
TURBO
ECONO SEND
ON 1 AUTO
OFF 1
OFF1: Use this button to set a schedule for switching the stove off automati-
TURBO
ON 2 CANCEL OFF 2
cally (programme 1).
ON 1 AUTO
ECONO SEND
ON 2 CANCEL
ON2: Use this button to set a schedule for switching the stove on automati-
5.
TURBO
cally (programme 2).
ON 1 AUTO
OFF 1
ON 2 CANCEL OFF 2
OFF2: Use this button to set a schedule for switching the stove off automati-
ECONO SEND
cally (programme 2).
TURBO
AUTO
ON 1 OFF 1
AUTO: Use this button to repeat the set timer programmes (1 and 2) dai-
ECONO SEND
ON 2 CANCEL
OFF 2
ly. Hold the button down for at least 2 seconds to activate/deactivate this
TURBO
mode. The display shows AUTO.
ON 1 AUTO
OFF 1
6.
ON 2 CANCEL OFF 2
CANCEL: Use this button to cancel the programmed switch-on or switch-off
times.
SETTING THE TEMPERATURE
ECONO
Use the
TURBO
ECONO SEND
40ºC). When the desired temperature has been selected, press ON 1
TURBO
ON 2
AUTO
ON 1 OFF 1
ON 2 CANCEL OFF 2
SETTING THE HEAT OUTPUT
Use the
ECONO
7. (3). The text on1-on2-on3-on4 or on5 will appear on the stove. The power (2) will
TURBO
also be shown on the remote control. You can also select Auto mode. See figure 6.
ON 1
CANCEL
ON 2
AUTO MODE
In this mode, the stove uses the difference between the desired temperature and
the room temperature itself to calculate the required output. To select auto mode,
press (1) until the
ECONO SEND
end auto mode, press
TURBO
(2). See figure 7.
ECONO SEND
ON 1 AUTO
TURBO
ON 2 CANCEL
ON 1 AUTO
OFF 1
ON 2 CANCEL OFF 2
OFF 1
OFF 2
OFF 1
OFF 2
SEND
AUTO
OFF 1
symbol appears and the time flashes.
CANCEL OFF 2
ECONO SEND
buttons to set the hours and minutes.
ECONO SEND
TURBO
AUTO
ON 1 OFF 1
TURBO again to confirm and press
ON 2 CANCEL OFF 2
ON 1 AUTO
OFF 1
ON 2 CANCEL OFF 2
OFF 1
OFF 2
OFF 1
OFF 2
SEND
and buttons (1&2) to set the desired temperature (from 7ºC to
AUTO
OFF 1
CANCEL OFF 2
button (1) to select the desired heat output setting. Then push
SEND
AUTO
OFF 1
OFF 2
symbol appears. Press
(1) again, select the desired output and confirm with
ECONO SEND
OFF 1
TURBO
OFF 2
ON 1 AUTO
OFF 1
ON 2 CANCEL OFF 2
.
ECONO SEND
TURBO
ON 1 AUTO
OFF 1
CANCEL
ON 2 OFF 2
(3). See figure 5.
ECONO SEND
TURBO
ON 1 AUTO
OFF 1
ON 2 CANCEL OFF 2
(2) to confirm your choice. To
ECONO SEND
TURBO
ON 1 AUTO
OFF 1
ON 2 CANCEL
OFF 2
ECONO SEND
TURBO
ON 1 AUTO OFF 1
ON 2 CANCEL OFF 2
4
157