Topcom Butler 1250 Mode D'emploi page 106

Butler 1250
7.17.1 Listening to Messages
• Press '2' (listen to messages). The answer machine will play the messages.
During playback, you have the following options:
• Press '2' to stop playback.
• Press '2' to restart playback.
• Press '3' to go to the next message.
• Press '1 1' to go to the previous message.
• Press '1' to repeat the current message.
• Press '6' to stop playback.
• Press '0' to erase the current message.
7.17.2 Erasing All Old Messages
After listening to all messages, press '0' to erase all old messages.
7.17.3 Recording Memos
• Press the '4' key.
• A beep will indicate that you can start recording.
• Say your memo.
• Press '6' to stop recording.
7.17.4 Playing Outgoing Message
• Press '5' to play the current outgoing message.
7.17.5 Recording Outgoing Message
• Press '1' to record OGM 1 or '3' to start recording OGM 2.
• A beep will indicate that you can start recording.
• Say your message.
• Press '6' to stop recording.
Note: Recording will be automatically interrupted after 2 minutes.
7.17.6 Turning Answering Machine On/Off
• Press the '* ' key to switch on the answering machine.
• Press the '#' key to turn off the answering machine.
7.18 Ending Remote Operation
If you want to end remote operation, press '6'.
7.19 Turning Answering Machine On Remotely
If the answering machine is switched off, you can turn it on remotely.
• Call your machine.
• The machine will pick up automatically after 10 rings and play outgoing message 2.
• Dial the VIP code (default 321) slowly after the message plays.
• Press the '*' key.
• The internal voice will say that the answering machine has been turned on.
• Press '6' to stop operation.
106