Lindy 38264 Manuel Utilisateur page 4

User Manual
Overview
No. 38264 – Transmitter
Port, button and LED description:

Power LED: Power indicator

Status LED: Status indicator - slow flash: normal operation / quick flash: abnormal operation

HDMI LED: Indicates the presence of an HDMI signal when lit

USB-PC port: Connect this port to a host device's USB port

Reset button: Press this button to re-initialize the unit

DC/5V port: Connect to the DC connector of the included power supply

UTP Network port: Connect a Cat.5e/6 cable

IR-TX port: Connect the included IR Transmitter cable

HDMI IN port: Connect the video source using an HDMI cable
No. 38265 – Receiver
Port, button and LED description:

Power LED: Power indicator

Status LED: Status indicator - slow flash: normal operation / quick flash: abnormal operation

HDMI LED: Indicates the presence of an HDMI signal when lit

USB button: Press to get control of the source USB device

USB 1 & USB 2 ports: Connect these ports to a standard USB keyboard and mouse

Reset button: Press this button to re-initialize the unit

DC/5V port: Connect to the DC connector of the included power supply

UTP Network port: Connect a Cat.5e/6 cable

IR-RX port: Connect the included IR Receiver cable

EDID button: Press for 3 seconds to copy the connected display EDID to all receivers within the
same network segment

HDMI OUT port: Connect to an HDMI display / projector using an HDMI cable
English