English
5. Notes on Use
The good thermal insulation of the Heating Plate HP 300 with
respect to the exterior makes it suitable for recessed table
mounting.
Warning: Danger of skin burns! Use a suitable covering
device as a safeguard against burns. Ensure adequate
circulation of air from below when operating the heating
plate in recessed table installation.
When preheating ceramic carrier material it is advisable to
use a thin Teflon or Capton intermediate layer on the heating
plate to prevent return of soldering heat to the heating plate.
6. Accessories
533 161 99 Hand support 490 x 340 mm
587 017 23 External Sensor
7. Scope of supply
HP 300 Heating Plate L x W x H: 220 x 160 x 45
Controller Unit WHP 300
Mains Cable
Operating Instructions
Safety Information
Subject to technical alterations and amendments!
10
PK Elektronik Vertriebs GmbH, E-Mail: info@pkelektronik.com, Internet: www.pkelektronik.com