Assembly of a third bicycle / Tilt bicycle carrier
PREMIUM 3:
Assembly of a third bicycle
NOTE
The assembly of a third bicycle is done using
the free wheel stoppers on the tyres as with the
attachment of the first and second bicycles. The
third bicycle is additionally connected to the centre
bicycle frame with the short lock bracket.
WARNING!
Personal injury or material damage due to loss
of the bicycle carrier during the journey.
Carrying bicycles without using the safety straps
can lead to accidents.
A loose connection between the bicycle carrier and
bicycle can lead to detachment of the connection
and loss of the bicycle.
Carefully observe all warnings on page 27
4
30
Tilting the bicycle carrier, access to the
luggage space
ATTENTION!
Material damage due to opening tailgate.
The tailgate could impact against the bicycle carrier
and be damaged.
Switch off electric tailgates and operate them
4
manually.
Fold down the bicycle carrier before opening the
4
tailgate.
CAUTION!
Personal injury or material damage due to
sudden folding down of the carrier.
Body parts or objects under or in front of the carrier
when it is folded down may be trapped.
Make sure that there is nothing under the carrier.
4
Keep all body parts, and particularly your head,
4
clear, and maintain a suitable safety distance.
Hold the carrier by the U-bracket when folding it
4
down. With your foot loosen the locking device
(1.) and then tilt the carrier downward with your
hand (2.)