Part Names; Interface Selector - NEC NP01SW Série Mode D'emploi

2. Part Names

2-1. Interface selector

Operation button/indicator section
Main power switch
Terminals (inputs)
DC IN terminal
HDBaseT port (output)
DC IN terminal
Connect the included AC adapter.
Connect the interface selector, AC adapter, power cord and power outlet securely.
To wall outlet
Main power switch
Turns the interface selector's power on and off.
Attention:
• Immediate after turning on the main power switch, all indicators for operation buttons flush.
While the indicators are flushing, operation buttons become unavailable.
HDBaseT port (output)
Connect a commercially available LAN cable here.
Connect either with the projector/display equipped the HDBaseT port or the receiver box here.
ENG-8