Step 2 Connecting - Sony VPL-PHZ12 Guide De Référence Rapide

Step 2
Notes
 Turn off all equipment before making any connections.
 Use the proper cables for each connection.
 Insert the cable plugs firmly; Loose connections may reduce performance of picture signals or cause a
malfunction. When pulling out a cable, be sure to grip it by the plug, not the cable itself.
 For more information, refer also to the instruction manuals of the equipment you are connecting.
Connecting a Computer
INPUT B/INPUT C
For connecting a computer with an HDMI output terminal.
Notes
 Use HDMI-compatible equipment which has the HDMI Logo.
 Use a high speed HDMI cable(s) on which the cable type logo is specified. (Sony products are
recommended.)
 The HDMI terminal of this projector is not compatible with DSD (Direct Stream Digital) Signal or CEC
(Consumer Electronics Control) Signal.
40
GB
Connecting
Connecting
HDMI cable (not supplied)
HDMI output
terminal
Computer
For information on other connecting methods,
refer to "Connecting the Projector" in the
Operating Instructions contained in the supplied
CD-ROM.