Télécharger Imprimer la page

SEVERIN SM 9681 Mode D'emploi page 13

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 16
Fill amounts
∙ For frothing, fi ll the container to a
maximum of 150 ml (lower max mark)
∙ For heating, fi ll the container to a
maximum of 300 ml (upper max mark)
Heating and frothing milk
∙ Connect the appliance to the mains.
∙ Place the container onto the base.
∙ Remove the lid from the milk container.
∙ Fit the 'Frothing' stirring insert (with coil)
to the shaft and place the assembly
(properly centred) into the milk container.
∙ Caution: If off-centre, the holder may
cause unusual operating noise. In that
case, switch off and re-centre the holder.
∙ Put the required amount of milk into the
container.
∙ Place the lid on the container.
∙ Press the On/Off switch once if you want
to heat up milk.
∙ The indicator light shows red, and the
appliance begins to heat up and froth the
milk.
∙ Once the milk is suffi ciently frothed,
the stirring and heating processes stop
automatically, and the indicator light goes
out.
∙ You can now remove the milk container
from the base.
∙ Pour out the milk, or use the plastic
spatula or a suitable spoon to take off the
milk froth.
∙ Detach the power cord from the wall
socket after use.
Cold-frothing milk
∙ Proceed as described in the section
'Heating and frothing milk', but press the
On/Off switch three times in succession.
∙ The indicator light shows blue and the
appliance starts cold-frothing the milk.
∙ Once the milk is suffi ciently frothed, the
stirring process stops automatically and
the indicator light goes out.
∙ You can now remove the milk container
from the base.
∙ Pour out the milk, or use the plastic
spatula or a suitable spoon to take off the
milk froth.
∙ Disconnect the appliance from the mains
after use.
Heating up milk
∙ Proceed as described in the section
'Heating and frothing milk', using the
'Heating' stirring insert.
∙ Press the ON/Off switch twice in
succession.
∙ The indicator light starts fl ashing red and
the appliance begins to heat the milk.
∙ Once the milk is suffi ciently hot, the
stirring and heating process stops
automatically and the indicator light goes
out.
∙ You can now remove the milk container
from the base.
∙ Pour out the milk.
∙ Disconnect the appliance from the mains
after use.
13

Publicité

loading