Technical Data; Hedge Trimmer; Vibration Information - IKRA IPHT2660 Manuel D'utilisation

TECHNICAL DATA

Hedge trimmer

Engine Type
Engine model
Fuel mixture
Motor power
Contents
tank capacity
Max. engine speed
Blade speed
Min. Clutch speed
Engine idling speed
Blade length
Cutting length
Max. cut thickness
Unit weight (empty tanks )
Noise information
Measured according to EN 60745;
1)
Sound pressure level L
1)
pA
Measured sound power level L
Guaranteed sound power level L

Vibration information

Vibration total values (triaxial vector sum) determined according to EN 60745, Uncertainty K = 1,5 m/s
Vibration emission value a
h
Vibration emission value a
h
Subject to technical alterations and amendments.
SPECIFIED CONDITIONS OF USE
The hedge trimmer has been designed to cut
hedges and brushes in private house gardens or
hobby gardens.
WARNING
Risk of injury
The hedge trimmer may not be used to cut grass,
hard brushes and wood or to crush material for
composting purposes.
Do not use this product in any other way as stated
for normal use. Not observing general regulations
in force and instructions from this manual does
not make the manufacturer liable for damages.
2000/14/ EG; Uncertainty K =3 dB (A)
2)
2)
WA
2)
WA
Front handle
Rear Handle
Please note that permissible uses for the tool
could be limited by national regulations. It
is necessary to comply with the regulations
applicable in the country where the truck is used.
Do not use the device near flammable liquids or
gases. Risk of fire and explosion in case of short
circuit.
Use the appliance only outside, never use it in
confined and bad ventilated areas.
The safety systems and safety devices of the
device must not be manipulated or deactivated.
DE DEUTSCH
IPHT2660
Air-cooling, 2-stroke
SK1E34F-LE
1:40
0,7 kW
25,4 cm
3
600 cm³
11500 min -1
2250 min -1
4200 min -1
3000 ± 300 min -1
690 mm
600 mm
27 mm
6,1 kg
99,6 dB (A)
104,7 dB (A)
108 dB (A)
2
8,204 m/s
2
5,591 m/s
2
21