Publicité
Les langues disponibles
Les langues disponibles
Set up and Configuration
If you use the Atago for the first time, the extension-retraction mechanism may still be
slightly stiff. Do not use excessive force to extend or retract the cylinders.
The Petromax Atago comes with an ingenious system that will allow you to use the Petromax Atago
instantly. Follow these steps to put the device into service.
1. Grasp the handle in the centre.
2. Carefully pull the handle upwards to extend the inner cylinder and the three support legs.
3. Once the Petromax Atago is ready for use, place it carefully on a stable, heat-resistant and even surface.
Preparation and Use
Do not use more than 30 briquettes at once. Do not use grill lighter fluids.
In no time, the Petromax Atago is ready for cooking and barbecue purposes. Only use solid grill lighters.
Grill lighter fluids are rather not suited, for the Atago burns solid grill lighters efficiently thanks to the
stack effect. Read and follow these instructions to prepare the Atago and to burn
1. Place the necessary amount of the solid grill lighter on the bottom of the Petromax Atago and
spread it out evenly.
2. Use the air regulation lever to allow maximum airflow.
3. Place the charcoal grate in the place provided in the Atago. Never use the Petromax Atago
without the charcoal grate!
4. Use charcoal tongs to place the desired number of briquettes (max. 30 briquettes) on the charcoal
grate.
5. Carefully light grill lighter.
DE
EN
FR
11
Publicité
