How The Timer Works - Steinbach Active Balls 50 Notice Originale

Masquer les pouces Voir aussi pour Active Balls 50:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 61

How the timer works

The pumps has an integrated timer.
When the desired filter pump running time is set (visible on the LED bar), the pump
operates for the set time from the time of first start-up and stops for the rest of the time
until 24 hours have passed. The colors of the LED display do not have any specific
meaning.
Within a 24-hour period, you can only set one filter running time with the integrated
timer. To set several intervals within a 24-hour period, you need an external timer (see
example "External timer").
The timer has battery (see "Technical data"). If the power supply is disconnected or in
case of a power outage, the start time and the running time are saved.
When the power supply to the pump is restored, the timer reactivates the pump at the
set start time and for the set running time.
The ON/OFF button only stops the pump while it is running. The timer
function can be deactivated only by disconnecting the pump from the power
supply.
Example: 6 hours running time
1. Connect the pump's power plug to the power supply.
The running time display is lit.
2. Press the timer button
3. Press the ON/OFF button
The pump now runs for 6 hours nonstop. If you pressed the ON/OFF button at 12 PM,
for instance, the filter system runs until 6 PM.
The timer activates the pump again at 12 PM.
Example: external timer
To use this mode a battery must be inserted and you need an external timer (not
included in the package contents).
4. Connect the timer to the power supply and set the desired running times.
The timer must not supply power to the pump.
5. Connect the pump's power plug to the timer.
The running time display is lit. If the display is not lit, the timer is inactive. Read the
operating instructions of the timer.
6. Press the timer button
The 24-hour setting indicates continuous operation.
7. Press the ON/OFF button
several times, until the LED "6" is lit.
29
to switch on the pump
30
several times, until the LED "24" is lit.
29
to switch on the pump
30
.
10
.
10
43

Publicité

Table des Matières

Dépannage

loading

Ce manuel est également adapté pour:

Active balls 75

Table des Matières