Silverline 312279 Mode D'emploi page 4

GB
Description of Symbols
The rating plate on your tool may show symbols. These represent important
information about the product or instructions on its use.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
Wear head protection.
Wear hand protection.
Read instruction Manual.
DO NOT use in rain or damp environments!
Always disconnect from the power supply when adjusting,
changing accessories, cleaning, carrying out maintenance and
when not in use!
WARNING: Moving parts can cause crush and cut injuries.
For indoors use only!
Class II construction (double insulated for additional protection)
Environmental Protection
Waste electrical products should not be disposed of with
household waste. Please recycle where facilities exist. Check
with your local authority or retailer for recycling advice.
Conforms to relevant legislation and safety standards.
Caution!
4
Original Instructions
Specification
Voltage: ........................................................ 230-240V~ 50Hz
Power: .............................................................................. 95W
No load speed: ......................................................... 1350min
Grinding wheel: ..................................ø56mm x 8mm, 100Grit
Compatible drill bits: .........HSS and carbon steel twist drill bits
Drill bit capacity: .........................................................3-10mm
Sharpening point angle: ....................................................118°
Power cord length:.............................................................. 2m
Ingress protection: ............................................................ IP20
Protection class: .................................................................
Weight: ......................................................................... 0.95kg
Sound and vibration information:
Sound Pressure L : ..................................................75.3dB(A)
PA
Sound Power L : .....................................................88.3dB(A)
WA
Uncertainty K: .................................................................... 3dB
The sound intensity level for the operator may exceed 85dB(A) and
sound protection measures are necessary.
As part of our ongoing product development, specifications of
SILVERLINE products may alter without notice.
WARNING: Always wear ear protection where the sound level exceeds
85dB(A) and limit the time of exposure if necessary. If sound levels are
uncomfortable, even with ear protection, stop using the tool immediately
and check the ear protection is correctly fitted and provides the correct level
of sound attenuation for the level of sound produced by your tool.
WARNING: User exposure to tool vibration can result in loss of sense of
touch, numbness, tingling and reduced ability to grip. Long term exposure
can lead to a chronic condition. If necessary, limit the length of time
exposed to vibration and use anti-vibration gloves. Do not operate the tool
with hands below a normal comfortable temperature, as vibration will have
a greater effect. Use the figures provided in the specification relating to
vibration to calculate the duration and frequency of operating the tool.
Sound and vibration levels in the specification are determined according
to EN60745 or similar international standards. The figures represent
normal use for the tool in normal working conditions. A poorly maintained,
incorrectly assembled, or misused tool, may produce increased levels of
noise and vibration. www.osha.europa.eu provides information on sound
and vibration levels in the workplace that may be useful to domestic users
who use tools for long periods of time.
A
Rotate back and
forth about 20°
-1
B
Centre Point
Cutting
Edge
Trailing
Edge