Safety instructions
GB
Safety instructions
• Risk of injury through an electric shock.
• Terminal connections to a 230 V network must be made
by an authorised electrician.
Warning!
• Only the back of the hand is protected by the device, no
protection against accidental contact.
• Do not bend, shorten or add extensions to the
Warning!
antenna.
• The programming button/PROG must be operated with
an insulated tool (1 KV electric strength).
• Before assembly, always disconnect the mains lead
from the power supply.
• The provisions of the local public utilities and stipula tions
for wet and damp rooms in accordance with VDE 100
must be observed when the system is con nected.
• Use in dry rooms only.
• For use with unmodified original SELVE parts only.
• Keep persons away from the systems operating range.
• Keep children away from controls.
• Always observe country-specific regulations.
• If the system is controlled by one or more devices,
the system operating range must be visible during
operation.
24