Anti-Blocking Function (Abs); Cutting Function - UNITED OFFICE ULG 300 B1 Mode D'emploi Et Consignes De Sécurité

Anti-blocking function (ABS)

At the start of the lamination process, the pouch may be pulled in at an angle or
jam itself inside the appliance .
♦ Turn the anti-blocking switch
longer be drawn in .
♦ Remove the pouch and turn the anti-blocking switch
pouch thickness .
♦ Re-start the lamination process .

Cutting function

If you want to use the cutting function on the pouch guide rail
pouch guide rail
♦ If necessary, fold in the document supports
♦ Attach the cutting attachment
pouch guide rail
another flat surface .
♦ Push the cutting head
pushed to both ends of the cutting rail
♦ Flip up the cutting rail
documents on the pouch guide rail
the pouch format guide
document .
♦ Use the markings on the scale table to align your document precisely .
♦ Flip the cutting rail
♦ Hold the paper firmly in place with one hand .
♦ To cut, press the cutting head
over the document in a single movement .
ULG 300 B1
to the position ABS . The pouch will no
e
.
1
so that it creates a flat surface with the
w
. To do this, place the pouch guide rail
1
as far as the stop . The cutting head
3
up using the rounded handle and position the
2
together until it is touching both sides of the
4
down so it clicks into place .
2
downwards with the other hand and push it
3
back to the desired
e
1
.
q
.
2
. Fix the document in place by pushing
1
GB │ IE
, take off the
on a table or
1
can be
3
│ 11 ■