CasaFan Speed 40 G Instructions De Montage page 9

which he has access that the plug remains removed.
- Check regularly, but most definitely before every use, the mains cable and mains plug for
damage.
- If any damage is visible, then further use of the unit must not be made.
- If any damage and/or reduced functioning occurs, switch off and do not manipulate the unit.
- If, in such as event, a repair is necessary, contact an authorised by the manufacturer custo-
mer service point.
- Clean the surface of the housing and the guard with a dry cleaning cloth and a damp brush.
- Do not use petrol or any similar light flammable cleaning material.
- After cleaning, the fan must be completely re-assembled.
Storage
- If the fan is not to be used for some time, then store it in a dry room.
- In addiion, you could put a cover on your unit to protect it from dust or dirt deposits.
Disposal
- Remove mains plug
- Cut through the mains cable at the plug
- Dispose of the unit in a proper manner.
Help with faults
Fault
Blade does not turn.
If the fault can not be remedied using the above listed remedies, then the plug has to be
removed from the socket.
A specialist must now establish the cause and carry out the repair work accordingly.
If the mains cable to this unit is damaged, then it can only be repaired by a repair workshop
named by the manufacturer, due a special tool being needed.
Note:
Opening the unit and repairs may only be carried out by a specialist!
Cause
Speed setting to „0".
Mains plug not correctly
inserted.
Household fuse blown/
trip defective.
Fuse has blown due to
overload (motor overhe-
ating).
Remedy
Switch on unit.
Insert mains plug.
Check household fuse/trip.
Remove unit from mains supply. Pull
plug from the socket and have the unit
repaired by a specialist or customer
service.
GB
9