Cameo ROOT PAR 4 Manuel D'utilisation page 9

CONFIGURE DMX MODE
Press MODE to access the main menu. Now use UP and DOWN to select the menu item DMX Mode and confirm with ENTER. Again use UP
and DOWN to select the desired DMX mode and confirm with ENTER. Press MODE once to return to the main display. The main display is
activated automatically after approximately two minutes of no input. Tables with the channel assignment of the different DMX modes can be
found in these instructions under DMX CONTROL.
CLROOTPAR4
--------Menu-------
DMX Address ----DMX Address----
DMX Mode
DMX Address
3CH
001–512 001–512 001–512
DMX Delay
DMX Mode
5CH1
Standalone
DMX Delay
5CH2
Slave
6CH
Settings
7CH
System Info
10CH
DMX DELAY
The DMX Delay feature is a simple way to create a running light effect with a large number of spotlights that are all the same model and
which are all running the same software version. This is otherwise only achievable with a suitable DMX controller and time-consuming
programming. All the spotlights used in this are set to the same DMX operating mode and controlled via the same DMX start address.
The delay time (DMX signal delay) can be manually set on each spotlight with different delay times (DMX Delay by DMX? No) or with the
same delay time for all spotlights via a connected DMX controller on a specially reserved DMX channel (DMX Delay by DMX? Yes).
Starting from the main display, press MODE to enter the main menu. Now use UP and DOWN to select the menu item DMX Delay and con-
firm with ENTER. Again use UP and DOWN to select the desired submenu item, confirm with ENTER and set the value or status accordingly.
Confirm all entries with ENTER.
--------Menu------- -------Delay-------
DMX Address Group
DMX Mode by DMX?
DMX Delay Delay
Standalone
Slave
Settings
System Info
Assign the spotlights to one of up to 47 groups as desired (maximum group number depends on the activated DMX operating mode).
Multiple spotlights may be assigned to a group. The group number is also the factor by which the set delay time is multiplied (see setup
example).
Spotlight (group) 0
No delay
-------Delay-------
DMX
Group
Controller
by DMX?
Delay
CLROOTPAR6
----DMX Address----
DMX Address
001–512 001–512 001–512 3CH
DMX Mode
5CH1
DMX Delay
5CH2
6CH
7CH
9CH
12CH
-------Delay-------
0 Group 0
0–23
No by DMX? No
0.0 s Delay 0.0 s
-------Delay------- -------Delay-------
Group 0 Group
No
by DMX? No by DMX?
Yes
Delay 0.0 s Delay
-------Delay-------
Group 0
0.0 s to
by DMX? No
2.0 s
Delay 0.0 s
Spotlight (group) 1 Spotlight (group) 2
1.5 s delay
-------Delay------- -------Delay-------
0 Group 1 Group
No by DMX? No by DMX?
0.0 s Delay 1.5 s Delay
-----By DMX?-----
Warning! Delay
0
No
No is controllable
Yes
by DMX now!
0.0 s
Spotlight (group) 3
3 s delay 4.5 s delay
-------Delay-------
2 Group
No by DMX? No
1.5 s Delay 1.5 s
-------Delay-------
Group
by DMX? No
Delay 1.5 s
-------Delay-------
Group
by DMX? No
Delay 1.5 s
-------Delay-------
Group 0
by DMX? Yes
Spotlight (group) 4 Spotlight (group) 5
6 s delay 7.5 s delay
-------Delay------- -------Delay-------
3 Group 4 Group
by DMX? No by DMX?
Delay 1.5 s Delay
3
3
5
No
1.5 s
9