Cameo ROOT PAR 4 Manuel D'utilisation page 15

Reset = Reset settings
Edit Preset = Store all system
settings in 3 individual
presets
Service = For service purposes only
Starting from the main display, press MODE to enter the main menu. Now use UP and DOWN to select the menu item System Info and
confirm with ENTER.
--------Menu-------
DMX Address
DMX Mode
DMX Delay
Standalone
Slave
Settings
System Info
This will take you to the submenu for accessing the system information (see table, selection with UP and DOWN, confirm with ENTER,
change status with UP and DOWN, confirm with ENTER).
System Info
Firmware = Displays device
firmware
Temperature = Displays temperature
of LED unit
Op Hours = displays operating time
Factory Reset to factory settings: Perform
reset with ENTER, cancel with MENU
Preset A Reset to Preset A: Perform reset with ENTER, cancel with
MENU
Preset B Reset to Preset B: Perform reset with ENTER, cancel with
MENU
Preset C Reset to Preset C: Perform reset with ENTER, cancel with
MENU
Preset A Store with ENTER
Preset B Store with ENTER
Preset C Store with ENTER
Firmware V1.xx
LED xxx °C / xxx °F
Unit °C (= display in degrees Celsius)
°F (= display in degrees Fahrenheit)
xx:xx h Displays total operating time in hours and minutes
15