Assistance And Warranty - Imetec L6901 Mode D'emploi

EN
• Remove the batteries:
1. Lift and remove the upper and lower panels of the handpiece (1) by
using a screwdriver as a lever (fig. B and C).
2. Use a screwdriver to apply pressure in the slot on the upper part of
the handpiece and in the two slots in the lower part of the handpiece
(1) (fig. D and E).
3. Open the two outer bodies by using a screwdriver as a lever in the
coupling area itself (fig. F).
4. Separate the two outer bodies and remove the inner shell (fig. G).
5. Remove all the screws and open the inner shell (fig. H).
6. Remove the screws that secure the battery (fig. I).
7. Remove the connector that connects the battery wires to the
electrical circuit (fig. L).
NOTE: Do not plug the appliance back in to the socket once the batteries
have been removed.

ASSISTANCE AND wARRANTY

To request repairs or purchase spare parts, please contact IMETEC's
authorised customer service centre on the Toll-Free Number below or
via the website. The appliance is covered by the manufacturer warranty.
For details, read the attached warranty sheet. Failure to comply with the
instructions for use and maintenance provided in this manual will render
the manufacturer warranty null and void.
38