Useful Tips - Imetec L6901 Mode D'emploi

NOTE: Do not use the appliance while it is charging.
ASSEMBLY
Before use, fit the pre-set head (3,4,5,6) on the head coupling area (1C).
TIMER
The appliance has an integrated timer: after 20 minutes of operation, the
appliance will switch off automatically.
It is still possible to switch the appliance off at any time before it does so
automatically.
INTENSITY OF ROTATION
The appliance has 2 rotation intensities that are to be selected as required.
• Intensity 1 (low) is active automatically when the appliance is switched
on and the On/Off button (1A) button is pressed again
operating LED (1B) lights up with a constant dim glow.
• Intensity 2 (high) is active when the appliance is on by pressing the
On/Off (1A) button again
a constant intense glow.
NOTE: If you press the brush too harshly on the skin, the device temporarily
stops the rotation. Rotation will restart automatically when the pressure is
relieved on the skin. If the pressure exerted is maintained for more than
10 seconds, a safety system intervenes and switches off the appliance.
Switch it on by pressing the ON/OFF button
HEADS
The appliance has 4 different heads:
• NORMAL with medium-hard bristles to cleanse normal skin
• SENSITIVE with soft bristles to cleanse delicate and sensitive skin.
• PEELING with hard bristles to exfoliate.
• PUMICE to remove calluses and hard skin in the more difficult areas.
The handpiece (1) can also be used in the shower and bath.
: the operating LED (1B) lights up with

USEFUL TIPS

(1A).
EN
: the
35