Preparing Your Appliance; Using Your Appliance - Brandt BO-1409 Manuel D'instructions

2/ PREPARING YOUR APPLIANCE

A. Description of the kettle
B. Preparing for use
Before using the first time or after a prolonged period of storage, it is recommended to operate the
kettle for 2 or 3 times following the instructions detailed in the next section.

3/ USING YOUR APPLIANCE

A. Filling the kettle
1. Place the appliance on a flat, dry, stable surface.
2. Remove the appliance from its base. Open the lid by pressing the opening button and fill the jug
with water.
3. The amount of water may be seen through the water level indicator and must not be below 0.5
litres or above 1.7 litres or the "MAX" mark.
4. If the kettle is overfilled, it is possible that the water may overflow when boiling.
Do not fill the kettle above the MAX level.
B. Connecting the kettle
1. Close the lid, ensuring that it fits hermetically in its place.
2. Place the kettle on its base. Unwind the wire from the base and plug it into the socket.
3. Move switch to the "1" position to connect the kettle. The light will come on to indicate that the
kettle is heating up.
Only use the kettle with the base provided; do not use any other type of connection.
When the appliance is in operation, the jug reaches high temperatures and there is a risk of
burns. Do not open the lid when the water is boiling.
1- Lid
2- Button
3- Handle
4- Body
5- Water ruler
6- Neon
7- ON/OFF
8- Power base
9- Power cord
10