Cleaning The Kettle; Decalcification; Warranty And After-Sale Service - Brandt BO-800 Manuel D'instruction

4/ CLEANING & MAINTENANCE
A. Cleaning the kettle
• To prolong the kettle's life, clean the mineral deposits in the kettle regularly.
• To avoid any danger, always unplug from the plug socket and allow it to cool down before cleaning.
• Do not use chemical, steel wool, or abrasive cleaners to clean the outside of the kettle, as these will
scratch the surface and fade the outside colour.
1. Fill the kettle with 0.5L white vinegar and the remainder with water and allow it to
stand for over 1 hour.
2. Empty the solution from the kettle. Wipe off the deposits remained with damp cloth.
3. Fill the kettle with clean water, bring to boil and then discard the water. Repeat and
the kettle will be ready to use.
4. If necessary, repeat the operations above for several times.
5. The surface of the kettle may be wiped over with a damp cloth and polished with a
soft dry cloth.
B. Decalcification
After a period of time, calcareous deposits accumulate on the inside of the kettle. This is normal,
although an excessive amount of lime may affect the proper functioning of the kettle. If this should
occur, use a commercially-available decalcifying solution. Never try to decalcify the kettle by chipping
away or scratching.
C. Warranty and after-sale service
This product is covered by a 2-year warranty by your retailer. For more details, please refer to the
warranty conditions supplied by your distributor.
FagorBrandt SAS – Management Company - SAS with a capital of 20,000,000 Euros- Head Office: 7
rue Henri Becquerel - 92500 Rueil-Malmaison - RCS Nanterre 440 303 196
11