Krüger & Matz KM7089 Mode D'emploi page 25

Owner's manual
nOrMaL cD OPeratiOn
• press „on/standbay" key to switch on the unit.
• press the „function" key repeatedly until the display shows „CD"
• press the „open/ close" key & insert a CD as described.
• The disk will automatically start spinning & the first song (track) will begin
playing. The display will indicate the current track no.
• At any anytime during playBACk, press the key to pause operation of the unit.
press key to resume operation at the same track & position.
• At anytime during playBACk, press the „stop" key to stop operation of the set.
This will reset the set to the first track (if you press play after stop, the first track
will always start playing).
• At anytime during playBACk, press and release the „NEXT" or „BACk" keys to
skip forward or BACkwards by one track, as desired.
• Any anytime during playBACk, press and hold the keys to fast forward (cue) or
fast-reverse (review) the specific track, which is currently playing.
PrOgraMMing the cD-PLaYer
• The CD player can be programmed to play any sequence of upto 20 tracks for
regular CD-audio discs & 99 track for mp3, as desired.
• Always press the „stop" knob before starting the programming.
• press the program knob, the display will show a memory symbol and the display
will show "p01 ", to indicate that the set is now in „memory programming mode",
at memory position no. 1.
• press the „NEXT/BACk" knobs to select the track (song) number you wish to be
stored in the first memory (program) position, and press the program knob to
confirm your selection.
• When you press „program" knob the display will advance to the NEXT memory
position number (eg. " " For 2nd position).
• Repeat the previous 2 steps, each time selecting any track number of your
choice to be stored in the successive memory (program) positions.
• After each track number, remember to press the „program" knob.
• After a maximum songs (or less) have been selected as described above, press
the „program" knob.
• Also, the „memory" symbol will remain „on" to indicate that you have saved a
program-memory (sequence).
• pressing „play" will now play BACk the „saved sequence" in the program
memory.
• pressing „NEXT/black" will move to the NEXT or previous song in the saved
sequence.
• To clear (cancel) the entire program which is stored in the memory, simply press
„stop", or switch „off" the set.
hOw tO PLaY cD-MP3 DiScS
• press "on/ STANDBY" key to switch on the unit.
• press the "function" ley repeatedly until the display show "CD".
• Insert an mp3 CD into the player and close the CD door.
25