Numark Mixtrack Edge Guide D'utilisation page 5

14. Jog Wheel: These wheels serve different functions depending on their current mode:
•
Cue Mix Mode: Press the Cue Mix Button to enter this mode. The Jog Wheels will adjust the
Headphone Output's blend between the Main Mix and the Cue Channel (the Decks with the PFL
button lit). Turn a Jog Wheel clockwise to hear more of the Main Mix or counter-clockwise to hear
more of the Cue Channel.
•
Browse Mode: With the FX button unlit, press the Browse Button to enter this mode. The Jog
Wheels move through your music library. Turn Deck 1's Jog Wheel to move through your folders
or Deck 2's Jog Wheel to move through your tracks.
•
Pitch Fader Mode: With the FX button unlit, press and hold the Pitch Button to enter this mode.
Turn the Jog Wheels to set the pitch adjustment of the tracks on their respective Decks. You can
fine-tune this pitch adjustment by pressing and holding the Shift Button and Pitch Button and
turning the Jog Wheels.
•
Pitch Bend Mode: With the FX button unlit, press the Pitch Button to enter this mode. Turn the
Jog Wheels to temporarily bend the pitch of the tracks on their respective Decks.
•
Scratch Mode: With the FX button lit, press the Browse Button to enter this mode. Turn the Jog
Wheels to "scratch" with the tracks on their respective Decks.
•
Search Mode: With the FX button lit, press the Pitch Button to enter this mode. Turn the Jog
Wheels to scan rapidly through the tracks on their respective Decks.
15. Channel Fader: Adjusts the volume of the Deck.
16. Crossfader: Adjusts the blend between the Decks as heard through the Master Output.
17. Play / Pause: Press this button to play or pause the track. While holding down the Shift Button, press
this button to "stutter" the track, causing it to play immediately from the last Loop In Point, Hot Cue
Point, or point where the track was paused.
18. Cue: If no Hot Cue Point is set, press this button to return to the beginning of the track and pause it.
When a Hot Cue Point is set, press and hold this button to play the track from the last triggered Hot
Cue Point. While holding the Cue Button, you can either (A) press and hold the Play Button and release
both buttons to continue playback or (B) release the Cue Button to return it to the last triggered Hot Cue
Point and pause it.
19. Sync / Keylock: With a track loaded to the Deck, press this button to activate Sync, which
automatically matches the track's tempo/speed to that of the track on the other Deck. Press and hold
this button for 2 seconds to deactivate Sync. While holding down the Shift Button, press this button to
activate or deactivate Keylock, which will lock the track's current pitch adjustment (its key), even if you
adjust its tempo/speed.
20. Hot Cue: These buttons set or trigger Hot Cue points, which are similar to regular Cue Points, except
that each time you press a Hot Cue button, the track will instantly jump to the defined point and begin
playing. To assign a Hot Cue point, press an unlit Hot Cue button where you want to assign it—the
button will illuminate. To delete a Hot Cue Point, press the corresponding Hot Cue Button while holding
down the Shift Button.
21. Loop In / 1/2X: When not in an active loop, press this button to set the Loop In Point. When inside an
active loop, press this button to "stutter" the loop, causing it to play immediately from the Loop In Point.
Press this button while holding down the Shift Button to halve its length.
22. Loop Out / 2X: When not in an active loop, and if there is already a Loop In Point, press this button to
set the Loop Out Point and activate the loop. While inside an active loop, press this button to deactivate
the loop. Press this button while holding down the Shift Button to double its length.
23. Reloop / Smart: When not in an active loop, and if there is already a loop in the track, press this button
to re-activate the loop. While inside an active loop, press this button to deactivate the loop. Press this
button while holding down the Shift Button to activate or deactivate Smart Loops, which will beat-align
an existing (or future) loop.
24. Sample 1, 4 / FX – : Press this button to play the corresponding sample. With the FX button lit, press
this button to select the previous effect for that Deck.
25. Sample 2, 5 / FX + : Press this button to play the corresponding sample. With the FX button lit, press
this button to select the next effect for that Deck.
26. Sample 3, 6 / FX On: Press this button to play the corresponding sample. With the FX button lit, press
this button to activate or deactivate the currently selected effect for that Deck.
27. Treble / FX 1: Turn this knob to adjust the Deck's high frequencies. With the FX button lit, turn this
knob to adjust the selected effect's first parameter (if available).
28. Bass / FX 1: Turn this knob to adjust the Deck's low frequencies. With the FX button lit, turn this knob
to adjust the selected effect's second parameter (if available).
5