Mounting And Operation; Power Supply - Bosch Professional GCY 30-4 Notice Originale

OBJ_BUCH-3215-001.book Page 32 Tuesday, June 13, 2017 10:25 AM
32 | English

Mounting and Operation

Power supply

 Remove the cover for the
dule GCY 30-4 on the power tool, e.g. using a screw-
driver or a large coin. Using unsuitable objects can dam-
age the electronics or the cover.
– To start using the product after purchasing it or to change
the battery 1, follow the illustrations on the graphics pages.
Observe the following advice when doing so.
Initial Operation
(see figures B1–B5)
Note: Store the placeholder 3 of the GCY 30-4 in a safe place.
Re-insert the placeholder when transferring the power tool
without GCY 30-4 to a third party.
Insert the battery 1 with the plus terminal facing upwards in-
to the GCY 30-4 2. It is not necessary to push in the battery.
To initialise the GCY 30-4 after inserting the battery, press the
On/Off switch of the power tool.
1 609 92A 3X9 | (13.6.17)
® Low Energy Mo-
Bosch Power Tools