•
Connect the short silicon tube 1 to the filter 2 to one of the two outlets of the bottle 3
•
The other end of the tube must be connected to the suction outlet of the equipment 4
•
Connect the PVC air tube 6 to the other outlet of the bottle 5 (biberon 250cc)
•
The other end of the tube must be connected to the small-diameter outlet of the breast pump
nipple shield located on the bottle.
•
Connect the plug to the electrical mains supply.
•
Switch on the equipment 7 to start suction and close the nipple shield's large-diameter outlet
with your finger
•
The bottle without couple must be used as an overflow container. It must not be filled.
•
The device must be used on a plan of horizontal operation.
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE
At the end of its working life, the product must not be disposed of as urban waste.
It must be taken a special local authority differentiated waste collection or to a dealer providing this service.
Disposing of a household appliance separately avoids possible negative consequences for the environment
and health deriving from inappropriate disposal and enables the constituent materials to be recovered to
obtain significant saving in energy and resources. As a reminder of the need to dispose of separately the
product is marked with a crossed-out wheeled dustbin.
INSTRUCTIONS
WITH EC DIRECTIVE 2002/96/EC:
13