Kenwood TK-2402 Mode D'emploi page 20

■ Scan
Press this key to start scanning the transceiver channels.
■ Scan + Temporary Delete
Scan pauses at an undesired channel, you can remove that
channel from the scanning sequence by press or hold this
key.
■ Scrambler
The Scrambler function allows you to hold a conversation
in complete privacy. When activated, any other party
listening in on your channel will be unable to understand
your conversation. Press this key to toggle the Scrambler
function ON or OFF.
■ Send the GPS data
Press this key when the GPS unit has been installed to
send your positioning data to the base station.
■ Speaker Switch
Use this key to switch between the external speaker
(earpiece speaker) or internal speaker (transceiver
speaker). Press this key to activate the external speaker.
Press again to deactivate.
■ Squelch Off
Press this key to hear background noise. Press the key
again to return to normal operation.
■ Squelch Off Momentary
Continuously hold down this key to hear background noise.
Release the key to return to normal operation.
■ Status 1/ Status 2
Press this key to send a status.
■ Talk Around
The Talk Around function allows you to communicate
directly with other transceivers, without the use of a
repeater. Press this key to toggle the Talk Around function
ON or OFF.
0