Dörr SnapShot Limited 5.0 Notice D'utilisation page 14

FORMATTING
This function deletes all fi les from the SD card and reformats the card.
Before formatting make sure that there are no fi les on the SD card you might need!
1. Press the arrow button (7) ‚ to select "Format"
2. Press the „OK" button (8) to select „Enter"
3. Press the arrow buttons (7) ƒor „ to select "Yes"
4. To start formatting press the "OK" button (8)
While formatting LCD display (5) shows "Please wait"
FACTORY SETTING
This sets all parameters to "factory defaults" except date & time.
1. Press the arrow button (7) ‚ to select "Default Set"
2. Save with „OK" button (8).
When settings are completed, press „MENU" (6) to return to start menu.
FILE NAME
Pictures and videos will be named continuously, starting with IMG0001.jpg (picture) or IMAG0001.avi (video).
TEST SHOOTING
To take a test shot manually enter the setup mode (9), press the arrow button (7) „ and release with "OK" button (8).
MOUNTING AND DIRECTING THE CAMERA
MOUNTING
Mount the camera to a tree, pole or any suitable object using the supplied fi xing belt. Do not fi x the belt fi nally at this stage.
For security reasons you may obtain cable lock optionally. Best distance to object is 3-10 meters. Larger distances are also
possible, however with less reliability of motion sensor. We recommend to take a few test shots and to fi nally fi x the camera
afterwards.
DIRECTING
The camera needs to be well directed for proper pictures.
1. Hang up camera in about 0,75 - 1 m height, slightly tilting ahead. The camera lens (4) should now point to where the photo-
graphic object is expected to show-up.
2. Set the On/O switch (9) to „SETUP" and close the camera housing. If you move in front of camera the LED indicator (2) is
fl ashing red and the motion sensor is active. The red LED (2) will fl ash as long as you are moving within the detection area.
3. We recommend taking several test photos to see the area covered by the camera. For this purpose, turn the camera o
fi rst. Then slide the On/O switch (9) to „ON" position and close the camera. After 15-30 seconds the camera is ready.
4. Move with normal speed through detection area. The camera triggers now.
5. The picture can be viewed with a laptop or PC. There are 2 options:
a) Connect the camera directly to computer using the supplied USB cord. Plug the USB cord into the Mini USB port
(11) of the camera and connect with USB port at your computer.
b) Remove memory card from camera and read out pictures with external card reader (optional).
14
"