Dörr SnapShot Limited 5.0 Notice D'utilisation page 12

CAM CAMERA SETTINGS
CAMERA/VIDEO MODE
Select between single photo or video shooting.
1. Press the arrow button (7) ‚ to select "Camera Mode".
2. Press the arrow buttons (7) ƒ or „ select "Photo" or "Video".
3. Save with „OK" button (8).
Video Quality:
Video Length:
PICTURE RESOLUTION
Select between 3MP or 5MP picture resolution.
1. Press the arrow button (7) ‚ to select "Photo Size"
2. Press the arrow buttons (7) ƒ or „ to select 3MP or 5MP.
3. Save with „OK" button (8).
NUMBER OF SHOTS
Select number of shots per motion.
1. Press the arrow button (7) ‚ to select "Photo burst"
2. Press the arrow buttons (7) ƒ or „ to select „1 Photo" „2 Photos" or „3 Photos"
3. Save with „OK" button (8).
PIR MOTION SENSOR SETTINGS
SENSITIVITY
Choose the sensitivity of the motion sensor or turn the sensor o .
4. Press the arrow button (7) ‚ to select "Sensitivity"
5. Press the arrow buttons (7) ƒ or „ to select "Normal", "High", "Low" or "O "
6. Save with „OK" button (8).
TRIGGER INTERVAL
Select time (1 sec to 60 min) when PIR sensor is deactivated after a shot.
1. Press the arrow button (7) ‚ to select "Trigger Interval"
2. Press the arrow buttons (7) ƒ or „ to select time.
3. Save with „OK" button (8).
TIME LAPSE
Set the interval of continuous photo shooting. Camera shoots photos during this time setting (5sec to 8h) regardless of the
motion sensor. If selected "OFF" the camera triggers upon motion. This setting is useful e.g. for observing a larger area in a
certain period.
1. Press the arrow button (7) ‚ to select "Time Lapse"
2. Press the arrow buttons (7) ƒ or „ to select time.
3. Save with „OK" button (8).
12
640 x 480 Pixels
10s (length not changeable)